Arkray PU-4010 - Setting the Time

PU-4010 3-3
Use the following procedure to view or adjust the time.
On the standby screen, press the
button three times.
• The icon will blink.
Press the button.
• The current date will appear.
Press the or button.
• The current time will appear.
Press the button.
• The icon and the left-most digit of the
time will blink.
Enter a new time using the numeric
buttons.
• To move between the entry fields, press the
hyphen button.
REFERENCE: To cancel your entry, press the button.
Press the button.
• This will confirm your entry and the standby screen will appear again.
3-2 Setting the Time
1
[
6
( )
]
2
3
[
8
( )
]
[
2
( )
]
4
5
6