Arkray PU-4010 - Transferring a Specific Result to an External Device

PU-4010 3-7
Use the following procedure to transfer an existing result in memory to an external device
connected to the instrument.
Display the result to be sent to the external
device.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button twice.
• If the printer is attached, press the
button three times.
• The icon will blink.
Press the button.
• The icon will light steadily to indicate that the result is being transferred to an
external device.
• After completion of transfer, the icon will disappear.
3-6 Transferring a Specific Result to an External Device
1
2
[
6
( )
]
[
6
( )
]
3
NOTE: The transfer operation cannot be cancelled in progress.