PU-4010 2-16
2-7-2 On Printouts
The following figures are examples of how results will print.
Items Descriptions
1 Measurement
number
The 4-digit measurement number for the sample. The measurement
number of an abnormal sample is preceded by an abnormal marker (
).
2 Patient ID The 13-digit patient ID preset before testing. If no patient ID has been set,
hyphens (-------------) appear instead.
3 Date and time The date and time when the test was performed. The date format can be
any of “year/month/day (default)”, “year/day/month” and “day/month/year”
according to your setting (See
“3-10. Customizing the Instrument” on
page 3-11).
4 Test Strip Type The type of test strip used for testing.
5 Environment
temperature
The environment temperature (centigrade) inside the instrument during
testing.
6 Abbreviations of
measurement
items
The abbreviations of the measured items. Only the measurement items
supported by the test strip appear on the printout.
: Indicates that the measurement item is abnormal.
! : Indicates that an incorrect value has been obtained for the ratio of
protein to creatinine (P/C) because of diluted sample.
7 Test result The result is shown as qualitative and semiquantitative values.
DILUTE: Indicates that an incorrect value has been obtained for the
ratio of protein to creatinine (P/C) because of diluted sample. Retry
measurement using a newly collected sample.
Normal Result
1
Abnormal Result
2
3
4
5
6 7 6 7
To Next Page
Loading...
Need help?
General
