Arkray PU-4010 - Reprinting All Results

PU-4010 3-10
All results stored in memory can be printed in a single operation when the printer is attached
to the instrument. Make sure the printer is connected to an AC receptacle.
Display any of the results in memory.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button once.
• The icon will blink.
Press the hyphen button four times.
• “ALL” will appear to indicate all of the results
will be printed.
Press the button.
• The icon will light steadily and the results will print with the most recent result first.
• After the completion, a short beep will sound and the standby screen will appear.
REFERENCE: To cancel printing, press the button. The printer will print the current result
before completely stopping.
3-9 Reprinting All Results
1
2
[
6
( )
]
3
4