Arkray PU-4010 - Setting the Date

PU-4010 3-2
Use the following procedure to view or adjust the date. The date appears in the “year-month-
day” format by default and can be changed to another format such as “month-day-year” or
“day-month-year” (see
“3-10. Customizing the Instrument” on page 3-11).
On the standby screen, press the
button three times.
• The icon will blink.
Press the button.
• The current date will appear.
Press the button again.
• The second lowest digit of the year will blink.
Enter a new date using the numeric
buttons.
• For the year, only the lowest 2 digits can be
changed.
• To move among the entry fields, press the
hyphen button.
REFERENCE: To cancel your entry, press the button.
Press the button.
• This will confirm your entry and you will be
prompted to enter a new time.
And then, ...
• To adjust the time go to step 5 in the “3-2. Setting the Time” on the next page.
• To return to the standby screen, press the button.
3-1 Setting the Date
1
[
6
( )
]
2
3
4
5