PU-4010 1-1
Chapter 1 Before Use
1-1-1 Features
• Compact, lightweight portable analyzer
The instrument alone weighs 180 g*. With the printer attached, it is a light 360 g*. The
instrument can run on batteries.
*Not including batteries or printer paper.
• Simple operation. Just press the start button.
Measurement is performed by simply pressing the start button and placing a test strip. Test
results can be simultaneously viewed on the display and printed out from the printer.
• Corrective features for obtaining accurate test results
Highly accurate readings can be obtained by eliminating the effects of chromaturia using the
color correction test pad, by compensating measurements for the temperature of the
surrounding environment using a built-in temperature sensor and by correcting specific
gravity based on pH readings.
• Auto detection of test strip type
When using self-identifiable test strips, the instrument can automatically detect the type of
strip during measurement.
• Hassle-free daily maintenance
The only maintenance required on a daily basis is to wash the test strip holder. And the holder
can be easily detached for cleaning without any special tools. The instrument also uses an
LED light source, so there is no need to change lamps.
• Store results for up to 100 samples. Output results to external devices.
Test results for up to 100 samples can be stored in memory. Stored results can be viewed,
printed and sent to an external device using an RS-232C at any time after measurement. As
results are recorded beyond the 100th entry, the new data overwrites the old data.
For more information, contact your distributor.
• Detachable printer
Attaching the printer to the instrument enables test results to be printed after measurement.
1-1 Outline of the PocketChem UA
To Next Page
Loading...
