PU-4010 v
Install the instrument in a place not
exposed to direct sunlight or wind.
Install the instrument on a level, vibration-
free sturdy platform.
DO NOT install the instrument near places
that store chemicals or near equipment that
generates corrosive gas or electrical noise.
DO NOT disassemble or modify the
instrument. Doing so may cause damage to
the instrument and consequently lead to
personal injury.
Remove the AC adapter when the
instrument is not in use.
Keep the instrument away from magnetic
sources such as magnets and speakers.
Keep the instrument away from liquids.
Penetration inside may cause damage to
the instrument.
DO NOT expose the instrument to physical
shocks or impacts.
To Next Page
Loading...
Need help?
General
