Note
— The availability of P-JTAG, SWD, 4-bit trace or 16-bit trace, F-JTAG FPGA debug or CMSIS-
DAP FPGA debug depends on the design which you implement in the FPGA.
— CMSIS-DAP debug accesses the FPGA on the same bus as P‑JTAG/SWD.
— The MPS2 and MPS2+ FPGA Prototyping Boards require Motherboard Configuration Controller
(MCC) firmware version 2.0.1 or later to support CMSIS-DAP.
2 Hardware Description
2.1 Overview of the MPS2 and MPS2+ hardware
100112_0200_09_en Copyright © 2013–2016, 2018–2020 Arm Limited or its affiliates. All
rights reserved.
2-24
Non-Confidential
To Next Page
Loading...
