18 Safety Instructions
THE USE OF METHANOL TO CLEAN OPTICAL SURFACES IS NOT
RECOMMENDED!
NEVER USE ACETONE TO CLEAN OPTICAL SURFACES!
NEVER TRY TO REMOVE THE SENSOR COVER GLASS!
DO NOT POINT THE CAMERA INTO DIRECT SUNLIGHT, VERY
BRIGHT LIGHT SOURCES, OR HIGH-ENERGY LIGHT SOURCES
(e.g. laser beams)! This may cause permanent damage to the camera
image sensor.
DO NOT POINT THE VIEWFINDER INTO DIRECT SUNLIGHT,
VERY BRIGHT LIGHT SOURCES, OR HIGH-ENERGY LIGHT
SOURCES (e.g. laser beams)! This may cause permanent damage to
the viewfinder display and optical elements.
To Next Page
Loading...
