ARRI ALEXA - Shoulder Pad SP-3

Shoulder Pad SP-3 37
8.10 Shoulder Pad SP-3
The camera base has an integrated arch to fit to the operator's shoulder. For
extended handheld shoots, the newly designed shoulder pad SP-3 can be
attached to the base of the camera with velcro.
Note: The SP-3 can only be used with a BP-12 and 19 mm rods or with 15 mm rods
and a WA-1+quick-release base plate. When using the BPA-1 with a BP-5/BP-8, the
bridge plate has to be removed prior to attaching the SP-3.
Figure 21: SP-3 shoulder pad
Figure 22: SP-3 below camera