44 Connectors
damage to both card and camera!
To release a card, push it inwards until it is unlatched. The spring will push
the card outwards. Be careful that the card does not drop out of the slot!
Cards do not have to be mounted or unmounted. They can be ejected
whenever the camera is not writing to the cards. Even if cards are ejected
during record, they maintain their functionality with the last take intact,
except that the last second of the take is lost.
Note: If a writing process is interrupted by power loss or card eject, remove the card
from the camera, copy all data from the card and format the card before using it
again.
A card select button is located between the card slots. By pushing it, the
currently active card can be toggled.
Each card has an LED that signals the card state to the user.
LED state Card state
Off No card present
Card is unreadable (e.g. wrong file system)
Card is inactive
Solid green Card is selected and ready
Solid red Card is accessed (read/write)
!DO NOT REMOVE CARD!
Only Sony SxS PRO cards can be used with ALEXA. Sony SxS-1 cards are not
supported.
To Next Page
Loading...
