58 Camera Controls
Record Sets audio recording On or Off.
If audio recording is switched off, no audio is
recorded in the QuickTime clips, the HD-SDI
contains no audio, and the Audio out is muted,
too.
Channel 1 level Manual allows the user to manually apply gain
to the input signal on channel 1 to reach a
correct level.
Unity matches a 4 dBu input signal to -20 dB
FS. This setting leaves enough headroom for
recording and avoids audio clipping. With unity,
audio levels can not be adjusted by the user.
Channel 2 level Manual allows the user to manually apply gain
to the input signal on channel 2 to reach a
correct level.
Unity matches a 4 dBu input signal to -20 dB
FS. This setting leaves enough headroom for
recording and avoids audio clipping. With unity,
audio levels can not be adjusted by the user.
Channel 1 source Choose whether left or right input signal shall
be routed to channel 1.
Channel 2 source Choose whether left or right input signal shall
be routed to channel 2.
Soundroll (=Tape) Enter the name of the soundroll (also known as
Tape in the menus of some recorders) of an
external audio recorder, for easier sound
alignment in post. The name is written to the
FCP XML file on the SxS PRO cards.
Figure 37: Audio out screen
To Next Page
Loading...
