ASCOM UPAC Series User Manual

TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
11
3 Authentication Levels and Default Passwords
Figure 7. UPAC start page
UPAC has different authentication levels:
•Using the Send Message function, i.e. creating and sending messages can be done by
any user in the system and requires no password.
• User rights is required for the administration of users & groups and the phonebook.
Default user name and password are “user” and “password”.
• Administrator rights is required for the setup, the configuration and administration of
UPAC, simple troubleshooting and changing passwords (except for the sysadmin
password). Default user name and password are “admin” and “changeme”.
• System Administrator rights is used for advanced troubleshooting, gives access to all
administration pages and the permission to change all passwords. Default user name
and password are “sysadmin” and “setmeup”.
3.1 UPAC Configuration Page
Figure 8. UPAC Configuration page
With system administrator or administrator rights you will be able to access the complete
UPAC configuration page from the Configuration-, Phonebook- and Users & Groups
buttons on the start page. Links to documentation are also found on the start page.
Figure 11.
Figure 12.
Figure 13.
requires no password
user
sysadmin & admin
010
Back to start page Back to configuration top page Add the page to favorites
011

ASCOM UPAC Series Specifications

General

Brand	ASCOM
Model	UPAC Series
Category	Conference System
Language	English