ASCOM UPAC Series User Manual

TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
53
Sending Messages
• First Persistent Fault
- Click “Add Message” in the Action on First Persistent Faults section to send a
message for the first persistent fault. Refer to Message Action on page 50.
- Click “Add E-mail” if an e-mail notification should be sent. Refer to E-mail Action on
page 50.
- Click “Add SNMP trap” to send a SNMP trap. Refer to SNMP Trap Action on page
51.
• No Remaining Faults
- Click “Add Message” in the Action on No Remaining Persistent Faults section to
send a message when all persistent faults are resolved. Refer to Message Action on
page 50.
- Click “Add E-mail” if an e-mail notification should be sent. Refer to E-mail Action on
page 50.
- Click “Add SNMP trap” to send a SNMP trap. Refer to SNMP Trap Action on page
51.
10.3 Activity Logging
To be able to view activities stored in the UPAC, it is also necessary to install the Java
Runtime Environment to run the Activity Log Viewer. To find this, go to www.java.com.
Functions in the Activity Log:
Figure 68.
Figure 69.

ASCOM UPAC Series Specifications

General

Brand	ASCOM
Model	UPAC Series
Category	Conference System
Language	English