TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
59
• Store Activities for a Specific IP Address/Service
1Mark “Store”.
2 Enter the IP address and service.
Note: All activities sent from another address/service than specified will be lost.
3 Click “Save”.
• Discard all Activities from/to a Specific IP Address/Service
When Discard is selected together with a specified IP address and service, all activities
from/to the specified service on the module will be filtered out and lost.
1Mark “Discard”.
2 Enter the IP address and service.
3 Click “Save”.
• Discarding Activities based on Type
It is possible to discard activities regardless of the sender/receiver. By default, the following
activity types are discarded; Availability Status, Location Data, Presentation and
Presentation Response.
1 Select activities from the Store box that should not be included in the log.
2 Move the activities into the Discard box with the arrow button, see figure 76.
3 Click “Save”.
10.3.3 Log Export
The Log Export Setup page is used for export of stored activities, either manually or
automatically in CSV or XML file format. Automatic export can be sent to an FTP server or
attached to an e-mail. Manual export is used when a certain time period of the activity log
should be exported. The automatic export is used when the activity log should be
exported regularly, for example the same time every day. On this page, it is also possible to
clear all stored Activity Logs.
Setting Description
Discard (default): All activity logs will be stored if nothing else is specified.
If Discard is selected, and IP Address/Service is specified - all
activities from/to the specified service or module will not be
stored.
Store: Only activities from/to listed services will be stored
IP Address/Service: On the format: xxx.xxx.xxx.xxx/service
To Next Page
Loading...
Need help?
General
