TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
13
6 Click “Save”.
4.2 Create Groups
Groups make it possible to send one message to several handsets in the system.
1 Click “Users & Groups” on the start page.
2 Enter User name and Password and click “OK”
3 Select Messaging Users > Groups in the left menu. The Create Group ID page
opens.
4 Enter the following settings:
5 Add members/handsets to the group in the Member Administration section.
Members can be added manually, or by using the Call ID search button.
The Call IDs must have been defined in Messaging Users > Users, if not, the group
cannot be saved.
6 Click “Save”.
Category: The messaging system to which the handset that shall
receive the diverted messages belongs.
Figure 16.
Setting Description
Call ID: Call ID for the group
Description: Description of the group.
Diversion permitted for
included members: Yes - Group messages will be delivered as any other
messages.
No - no diversion will be made for group messages
To Next Page
Loading...
Need help?
General
