EFD1000 VFR PFD Pilot’s Guide
Page xxii
091-00028-001 ( ) EFD1000 VFR PFD Pilot’s Guide
Page PB
091-00028-001 ( )
Information Covered in this Pilot’s Guide
This Pilot’s Guide covers all the features and options available in the EFD 1000 VFR .
VFR PFD Options:
- ACU (Analog converter unit) used to connect auto pilots, analog nav sources, legacy
GPS.
- EHA (Evolution hazard awareness) Includes XM weather, trac, lightning
If there is a chance you may wish to upgrade to a Pro in the future including the
optional ACU with the original VFR install is highly recommended. Including it in the
initial install eliminates the need to open up the aircraft during a VFR to PRO upgrade.
If an ACU was part of the initial VFR installation the VFR to PRO upgrade is a simple
software upgrade.
The VFR to PRO software upgrade converts the EFD 1000 VFR CDI to a HSI in both 360
compass and arc modes, adds dual bearing pointers in 360 compass mode, vertical
deviation indicator, localizer deviation indicator, minimums (decision height) ight
director and Radio Altitude display input.
NOTE
The VFR PFD supports the display of ight plan and
background navigation data from ARINC 429 GPS
and RS 232 interfaces.