Astoria Plus4YouTS - Specifications; Intended Use

13
Technical manual
ENGLISH
1.5 Specications
The machine is identied by the identication plate
axed on the base of the frame under the drain tray,
on which are listed the identication data and the CE
marking attesting compliance.
For the following information, always refer to the
nameplate of the machine:
• type and model of the machine (to be reported in
every communication);
• machine serial number (required to be reported in
every communication);
• date of manufacture (month and year);
• indication on power and pressure type on the mains.
The data of the appliance can be seen also on the
label located on the package of the machine.
1.6 Intended use
The machine object of this Manual consists of
mechanical, electrical, and electronic components whose
combined action allows to make milk, coee and water-
based beverages.
This machine must be used exclusively for its intended
use.
This machine is designed and constructed to operate
only after being properly connected to a hydraulic and
electrical network and placed so as to be sheltered from
atmospheric agents.
!
It is forbidden to remove or damage the
plates. If necessary, replace urgently,
contacting the manufacturer always and
exclusively.
!
The overview constitutes the use for which
it was designed, created and protected.
Non-compliance with and/or non-adherence
to the technical parameters described
below, their tampering with and/or generic
variation, are strictly prohibited. Any other
use is considered improper and therefore
dangerous.
specica-
tion plate
Groups 2 3 4
Power supply voltage V 230/400 240/415 230/400 240/415 230/400 240/415
Total power W 4,400 4,700 5,500 6,100 7,100 7,700
Power x group W 150x2 165x2 150x3 165x3 150x4 165x4
Coee water tank heating element power per group W 1,000x2 1,090x2 1,000x3 1,090x3 1,000x4 1,090x4
Steam boiler power W 3,000 3,270 3,000 3,270 5,000 5,445
Steam boiler capacity lt / UK gal 8 / 1.76 13 / 2.86 13 / 2.86
Coee water tank capacity lt / UK gal (1.2/ 0.26)x2 (1.2/ 0.26)x3 (1.2/ 0.26)x4
Width mm / in 830 / 32.7 1070 / 42.1 1310 / 51.8
Depth mm / in 580 / 22.8 580 / 22.8 580 / 22.8
Height mm / in 575 / 22.6 575 / 22.6 575 / 22.6
Net weight kg / lb 74 / 163 94 / 207 110 / 243
Operating conditions °C / °F 5 ÷ 40 / 41 ÷ 104