Astoria Plus4YouTS - Cleaning Procedures

56
Technical manual
16 Cleaning
For perfect cleaning and eciency of the appliance,
several simple cleaning operations are necessary on
the functional parts and accessories as well as the body
panels. The indications given here are applicable for
normal use of the coee machine. If the machine is used
continuously, then cleaning should be performed more
frequently.
Before cleaning the machine, turn it o the machine
and let it cool o.
Cleaning
Daily
Weekly
Monthly
CAPP. MAKER
Clean several times a day as indicated in the chapter
Cappuccino", especially if used continuously.
XXX
FILTERS and FILTER HOLDERS
Clean the lter holders daily leaving them to soak in
hot water overnight so that the fatty coee deposits
can dissolve and then rinse under running water.
Weekly perform the same washing for 10 minutes in
warm water and cleaning agent.
Failure to clean the lter holders will compromise
the quality of the coee and the lterholder correct
operation.
Caution: only immerse the lter holder cup.
Do not immerse the handle.
X
Cleaning
Daily
Weekly
Monthly
CUP TRAYS
Extract the grids from the housing;
Clean with a cloth dampened in lukewarm water.
Reinsert the grids in their housing.
X
BODY
Clean the panels of the body with a cloth dampened
in lukewarm water. Do not use abrasive detergents
which may scratch the surface of the body.
Remove the drip tray and cup holder grill and wash
with hot water. During the cleaning operations pay
attention to the edges and protruding parts.
X
STEAM NOZZLE - MILK FOAMER - AUTOSTEAMER
Keep the nozzle clean at all times using a cloth
dampened in lukewarm water.
X
DISPENSING UNIT
Carry out the washing of the groups as indicated in
Chapter "Group washing" and follow the instruc-
tions below:
• use the blind portalter;
• pour the detergent on the solid lter and attach
the lter holder;
• Carry out a series of deliveries until the water
comes out clean;
• remove the lter holder from the unit and carry
out at least one delivery so as to eliminate any
detergent residues.
X
PERFORATED DISK
and CONTAINMENT
RING
Loosen the screw (A)
and remove the
perforated disk (B)
and containment ring (C) from the delivery group.
Wash with hot water.
X
C
B
A