EasyManuals Logo

ASUSTeK COMPUTER GigaX3112 Series User Manual

Default Icon
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
56
GigaX3112 Series Layer 3 Managed Switch
Note
Figure 61. Dial-In user
4.9.3 RADIUS
In order to use external RADIUS server, the following parameters are required to
be setup:
Authentication Server IP: The IP address of the RADIUS server.
Authentication Server Port: The port number for the RADIUS server is
listening to.
Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must
be the same as the VLAN of the system management interface.
Click
OK
to make the settings permanent. Click
Reload
to refresh the settings to
current value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASUSTeK COMPUTER GigaX3112 Series and is the answer not in the manual?

ASUSTeK COMPUTER GigaX3112 Series Specifications

General IconGeneral
BrandASUSTeK COMPUTER
ModelGigaX3112 Series
CategorySwitch
LanguageEnglish