81
GigaX3112 Series Layer 3 Managed Switch
5.3.19.2 vlan vid
Use the vlan vid command to create vlan entry on the switch.
CLI Syntax:
vlan vid
Example:
(config)# vlan 2
5.3.19.3 name string
Use the name string command to create vlan entry with string on the switch.
CLI Syntax:
name string
Example:
(config-vlan)# name VLAN2
5.3.19.4 access vlan
Set access mode characteristics of all interfaces and Set Virtual LAN.
CLI Syntax:
switchport access vlan <1-4094>
Example:
(config)# interface fa1/0/2
(config-if)# switchport access vlan 1
5.3.19.5 allowed VLANs
Use the switchport trunk allowed vlan configuration command on the switch
to add or remove the allowed VLANs that can receive and send traffic on this
interface in tagged format when in trunking mode
CLI Syntax:
switchport trunk allowed vlan (add|remove) VLANLIST
Example:
(config)# interface fa1/0/2
(config-if)# switchport trunk allowed vlan add 1
5.3.20 GVRP
5.3.20.1 clear gvrp statistics
Use the clear gvrp statistics configuration command on the switch to clear all the
GVRP statistics information on one or all interfaces.
CLI Syntax:
clear gvrp statistics [IFNAME]
Example:
ASUS# clear gvrp statistics gi1/0/2
To Next Page
Loading...
Need help?
General