59
GigaX3112 Series Layer 3 Managed Switch
When some port status is “Shutdown”, you can click it and select “Re-Start” to
“Yes”. It will restart the port and change status to “SecureUp”. Please click when
youʼre done with the modification.
Click
OK
to make the settings permanent. Click
Reload
to refresh the settings to
current value.
Figure 64. Port Status
4.9.4.3 Secure MAC Address
Secure MAC Address offers three functions for user management:
Query:
You can select a port by “Port Selection” field. After click “Query”
button, it will show all MAC addresses on this port.
Add:
User can select some port by “Port Selection” field, and input a MAC
address to add on “MAC Address” field. After push “Add” button, the MAC
address will add on the selected port and the type of the MAC is static.
Remove:
You can use “Query” function to display all the MAC addresses on
some port. Selecting a MAC from list and pushing “Remove” button, it will be
removed immediately.
Figure 65. Secure MAC Address
To Next Page
Loading...
Need help?
General