68
GigaX3112 Series Layer 3 Managed Switch
5.3.3.7 help
This command lists all of the command of the operation mode.
CLI Syntax:
list
Example:
ASUS# list
Example:
ASUS# ?
5.3.3.8 Host name
Displays the given name of the switch. This is an RFC-1213 defined MIB object
in System Group, and provides administrative information on the managed node.
CLI Syntax:
hostname WORD
Example:
(config)# hostname Switch
If you put a name in the name description field, the switch system name changes
to the new one.
5.3.3.9 System Contact
Displays the detail information of contact about the switch. This is an RFC-1213
defined MIB object in System Group, and provides contact information on the
managed node.
CLI Syntax:
snmp-server contact DWORD
Example:
(config)# snmp-server contact fae@loop.com.tw
If you put the contact description in the contact description field, the switch
contact will change to the new one.
5.3.3.10 System Location
Displays the physical location of the switch. This is an RFC-1213 defined MIB object
in System Group, and provides the location information on the managed node.
CLI Syntax:
snmp-server location DWORD
Example:
(config)# snmp-server location Loop-Taipei
Type in the location description in the location description field to change the
location.
To Next Page
Loading...
Need help?
General