Ch. 12. Cantilever Holder Guide Sec. 12.4. Storage
4.
Clean:
• Use a soft swab to clean the surface of
the cantilever holder.
• Rinse and repeat as desired.
5. Blow dry with compressed filtered air.
6. Remove the holder from the cup.
7. Blow dry around the large O-ring, some solvent may have become trapped in the outer perimeter
O-ring groove.
12.4. Storage
After cleaning, store the cantilever holder in the membrane box in which it originally shipped.
Figure 12.1.: A cantilever holder proper ly stored in its box.
DRAFT
Page 146
To Next Page
Loading...