Asylum Research cypher - 15 Conductive AFM; Parts List; Required Items; Tutorial: Conductive AFM

Ch. 15. Conductive AFM
15. Conductive AFM
CHAPTER REV. 1711, DATED 10/23/2013, 22:16. USER GUIDE REV. 1714, DATED 10/25/2013, 20:36.
Chapter Contents
15.1 parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
15.2 Required items: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
15.3 Tutorial: Conductive AFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
15.4 Testing the ORCA Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
15.1. parts list
To be completed at a future date.
15.2. Required items:
• An ORCA conductive AFM cantilever holder, such as 901.767 shown in
Section 12.1.1 on page 141.
• The gas cell body (901.746) shown in
Section 13.1 on page 148.
• The gas cell cable (448.137) shown in
Section 13.1.2 on page 149.
• The Electrical Sample Puck Assembly (448.140) , included in the Environmental Scanner Acces-
sory kit.
• An electrically conducting cantilever, such as the Asylum Electrilever.
15.3. Tutorial: Conductive AFM
1. This technique will work only with the Gas Cell Body, but with any sample stage. Please follow
the tutorials on:
• Sample stage and cell body assembly:
Section 13.3 on page 158.
• Mounting the sample stage onto the Environmental Scanner:
Section 13.4 on page 164.
2. Install the gas cell cable. See on page
151.
DRAFT
Page 178