Ch. 21. Shipping or Moving Sec. 21.5. Ancillary Equipment
4.
Bag the cantilever changing station.
5. Put it in the square slot in the foam – be careful of the lever.
6.
Bag all the cantilever holders and accessories
and place them in the Cypher Accessory Kit.
7. Close the Cypher Accessory Kit and place it in a foam slot in the accessory foam/box.
8.
If this is anew system, put the Olympus
Sample Pack in a slot in the foam/box.
9. Put any additional accessories for this specific order in the foam/box. If they aresmall items, place
them in the Cypher Accessory Kit Plastic Case for safekeeping.
21.5. Ancillary Equipment
21.5.1. ARC2 Controller
Set of instructions on how to pack the ARC2. Section has yet to be written.
BETA
Page 261
To Next Page
Loading...