AudioCodes C455HD Series User Manual

CHAPTER3 Starting up
C455HD | Users & Administrator's Manual
Setting Description
SwitchtoTeamsCompatible
Factorydatareset(theequivalentofrestoretodefaults;including
logoutanddevicereboot)
ADB(AndroidDebugBridgecommand-linetoolusedtodebugthe
Teamsapp);thesettingisdisabledbydefault.Thedevicedoesnot
allowaccesstoADB.
ScreenCapture.Bydefault,thissettingisenabled.Ifit'sdisabled,the
phonewon'tallowitsscreenstobecaptured.
Configuring Wi-Fi
NetworkadministratorscanconfigureWi-Fiparameters forthephone.Theparametersare
concealedfromtheuser'sview.Usethefollowingtableasreference.
Table 3-2: Wi-Fi Parameters
Parameter Description Values
network/wifi_enabled Enables/disablestheWi-Fifeature. 0(disable,
default)
1(enable)
network/wifi_pc_bridge EnablesnetworkconnectivityforthePC
behindthephone;fordebuggingpurposes.
0(disable,
default)
1(enable)
network/wifi_ipv4_method DefinestheDynamicorStaticIPaddressfor
Wi-Fi.
DHCP
(default)
STATIC
network/wifi_channel_mode EnablestheWi-Fichannelmode:
■ 2.4Gonly
■ 5Gonly
■ 2.4G+5G
5G_2_4G
(default)
2_4G_
ONLY
5G_ONLY
Thefollowingtableshowstheparametersperindex.Thephonecancurrentlystore16
connectedSSIDs.
Table 3-3: Wi-Fi Parameters per Index
Parameter Description Values
network/wifi/[0- SavestheAccessPoint’sSSID. -
- 33 -

AudioCodes C455HD Series Specifications

General

SIP Accounts	Up to 16
Wall Mountable	Yes
Connectivity	Ethernet (10/100/1000 Mbps)
Bluetooth	Bluetooth 5.0
USB Ports	2 x USB 2.0
Headset Support	Yes, RJ-9 and USB
Power	PoE (802.3af) or AC adapter
Audio	HD voice, Acoustic echo cancellation, Background noise suppression
Codecs	G.711, G.722, Opus
Operating System	Android based
Supported Protocols	SIP, RTP, SRTP, HTTP, HTTPS, TLS, DHCP, DNS, TFTP
Supported Languages	Multilingual support
Weight	900g