Hardware Installation Manual 2. Unpacking the Device
Media Gateways & SBCs 13 Mediant 1000B Gateway & E-SBC
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device is shipped.
To unpack the device:
1. Open the carton and remove the packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
• One or two AC power cables (depending on customer order)
• Four anti-slide bumpers for desktop installation
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
To Next Page
Loading...
