AudioCodes Mediant 1000B - Mounting in a 19-Inch Rack Using Front- and Rear-Mounting Brackets

Mediant 1000B Gateway & E-SBC
Hardware Installation Manual 32 Document #: LTRT-41441
4.2.3 Mounting in a 19-inch Rack using Front- and Rear-Mounting
Brackets
The device can also be mounted in a 19-inch rack, using optional, rear-mounting brackets,
in addition to the front-mounting brackets. The rear-mounting brackets provide extra weight
support for the chassis. The rear-rack mounting brackets attach the rear of the chassis to
the two rear-mounting posts.
Depending on the depth of the rack in which you are installing the device, you can order
one of the following rear-mounting brackets, which differ in length, from AudioCodes as a
Rear-Rack Mounting Bracket Kit accessory item (separate orderable item):

Adjustable rear-mounting bracket from 59.3 to 62.7 cm (23.3 to 25 in.). The length of
the rear-mounting brackets can be adjusted from 593 to 627 mm, to suit the distance
between the chassis and the rear post. The customer part number (CPN) of this kit is
M1KB-REAR-RMK-60.
Rear-Mounting Bracket x 2 Rear-Mounting Flange x 2
x 2
x 6

Fixed-length rear-mounting bracket of 80 cm (31.5 in.) The CPN of this kit is M1KB-
REAR-RMK-80.
Rear-Mounting Bracket x 2 Rear-Mounting Flange x 2
x 6
x 6