AudioCodes Mediant 1000B - Figure A-10: Entering IP Address in Remote Desktop Connection; Figure A-11: Entering User Name and Password in Remote Desktop Connection; Figure A-9: Changing the Pcs IP Address

Mediant 1000B Gateway & E-SBC
Hardware Installation Manual 90 Document #: LTRT-41441
2. Change the PC's IP address so that it is in the same subnet as the default OSN3
server's IP address (i.e., 10.1.10.12). The figure below displays an example of
changing a PC's IP address:
Figure A-9: Changing the PC's IP Address
3. Start Microsoft's Remote Desktop Connection program - from the Start menu, point to
Programs, to Accessories, to Communications, and then click Remote Desktop
Connection.
Figure A-10: Entering IP Address in Remote Desktop Connection
4. In the 'Computer' field, enter the OSN server's default IP address (i.e., 10.1.10.12).
5. Click Connect.
Figure A-11: Entering User Name and Password in Remote Desktop Connection
6. Enter the OSN server's default username ("administrator") and password ("123456").
7. Click OK; Remote Desktop Connection connects you to the desktop of the device's
OSN server.