AUMA AC 01.2 User Manual

Read operation instructions first.
●
Observe safety instructions.
Purpose of the document:
This document contains information for the commissioning, operation and maintenance staff. It is intended to
support local device operation and setting modifications.
Reference documents:
●
Operation instructions (Assembly, operation, commissioning) for actuator.
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
81. Safety instructions.................................................................................................................
81.1. Prerequisites for the safe handling of the product
91.2. Range of application
91.3. Warnings and notes
91.4. References and symbols
102. Short description...................................................................................................................
113. Operation................................................................................................................................
113.1. Operating the actuator from local controls
113.2. Actuator operation from remote
123.3. Menu navigation via push buttons (for settings and indications)
133.3.1. Menu layout and navigation
143.4. User level, password
143.4.1. Password entry
143.4.2. Password change
153.4.3. Timeout for incorrect password entry
153.5. Language in the display
153.5.1. Language change
174. Indications..............................................................................................................................
174.1. Indications during commissioning
174.2. Indications in the display
184.2.1. Feedback signals from actuator and valve
204.2.2. Status indications according to AUMA classification
214.2.3. Status indications according to NAMUR recommendation
234.3. Indication lights of local controls
234.3.1. Indication lights: change colour
255. Signals (output signals).........................................................................................................
255.1. Signals via Profinet
255.2. Status signals via output contacts (digital outputs)
255.2.1. Assignment of outputs
255.2.2. Coding the outputs
255.3. Configurable status signals
265.4. Analogue signals (analogue outputs)
265.4.1. Assignment of analogue output 1
275.4.2. Signal range of analogue output 1
285.4.3. Adjustment of analogue output 1
2
Actuator controls
Table of contents AC 01.2/ACExC 01.2 Profinet

AUMA AC 01.2 Specifications

General

Brand	AUMA
Model	AC 01.2
Category	Control Unit
Language	English