AUMA AC 01.2 User Manual

285.4.4. Assignment of analogue output 2
285.4.5. Signal range of analogue output 2
285.4.6. Adjustment of analogue output 2
306. Operation ...............................................................................................................................
306.1. Operation mode Off
306.2. Operation mode Local
306.2.1. Push-to-run operation or self-retaining Local
316.3. Operation mode remote
316.3.1. Push-to-run operation or self-retaining Remote
326.4. Operation mode EMERGENCY
326.5. Operation mode EMERGENCY stop
326.6. Operation mode Disabled
326.7. Operation mode Service
347. Basic settings for commissioning........................................................................................
347.1. Type of seating for end positions
347.1.1. Type of seating: set
357.2. Torque switching
367.2.1. Torque switching: set
377.3. Limit switching
377.3.1. Limit switching: set
397.3.2. End position setting via stroke
427.4. Date and time
427.5. Display formats
427.5.1. Date format
437.5.2. Time format
437.5.3. Number format
437.5.4. Torque unit
437.5.5. Temperature unit
437.5.6. Position units
447.5.7. Process factor units
457.5.8. Analogue working value units (AIN)
457.5.9. Analogue signal output units (AOUT)
467.6. Contrast
478. Application functions.............................................................................................................
478.1. Intermediate positions
478.1.1. Intermediate positions of pivot points: define
478.1.2. Signal behaviour of intermediate positions: set
488.1.3. Hysteresis for intermediate positions: set
498.2. Operation profile (operation behaviour) for intermediate positions
498.2.1. Operation profile: activate
498.2.2. Operation profile for intermediate positions (pivot points): set
508.2.3. Off times for intermediate positions (pivot points): set
508.3. Two-wire control
518.4. Positioner (operation mode Remote SETPOINT)
518.4.1. Positioner: activate
518.4.2. Adaptive behaviour: activate deactivate
528.4.3. Overrun (inner dead band): set manually
528.4.4. Max. error variable (outer dead band): set manually
538.4.5. Dead time: set
3
Actuator controls
AC 01.2/ACExC 01.2 Profinet Table of contents

AUMA AC 01.2 Specifications

General

Brand	AUMA
Model	AC 01.2
Category	Control Unit
Language	English