Home
Automated Logic
Network Hardware
OptiFlex G5CE
Automated Logic OptiFlex G5CE User Manual
5
of 1
of 1 rating
51 pages
Give review
Manual
Specs
To Previous Page
To Previous Page
Loading...
OptiFlex™ BACne
t Integrator
(part n
o. G5CE)
Automated Lo
gic Proprietary an
d Con
fidential
A Carrier Compan
y.
©
2022
Carrier.
Rev. 6/9/2022
All rights reserved.
47
Important changes to t
his document are listed below. Min
or changes such
as typographical or formatt
ing
errors are not listed.
Date
Topic
Change de
scription
Code*
10/1/18
Entire document
Major changes due to:
- The addition of Modbus
- Controller label changes
- New and revised controller setup pages
- Driver pages revisions
X-D
8/24/18
Driver
In description of "Number of integration points
requested", removed "non-BACnet" from first line.
X-
TS
-
TS
-
E
* For internal use only
50
Table of Contents
Table of Contents
3
What Is the Optiflex™ Bacnet Integrator (Part No. G5CE)
5
Critical Product Announcement
6
Specifications
6
Zone Sensors
9
Touchscreen Devices
9
To Mount the G5CE
10
Wiring for Power
11
To Wire for Power
12
Addressing the G5CE
12
To Set up Autobaud
13
To Set the IP Address
14
To Set the Port S1 Address and Baud Rate
16
To Set the Port S2 Address and Baud Rate
16
Wiring for Communications
17
Wiring Specifications
17
To Connect the G5CE to the Ethernet
18
To Wire to a Bacnet/Arcnet Network
18
To Wire to a Bacnet MS/TP Network
18
To Wire a Third-Party Device
19
Wiring Devices to the G5Ce's Rnet Port
19
To Communicate through the Bacnet/Ip Service Port Network
19
Downloading the G5CE
20
To Download from the Webctrl® Interface
21
Adjusting the G5CE Driver Properties
21
Driver
21
Device
23
Notification Classes
23
Calendars
24
Common and Specific Alarms
25
Bacnet Router Properties
26
Bacnet Firewall
27
Network Diagnostics - Statistics
28
Network Diagnostics - Packet Capture
30
Communication Status
31
To Set up Network Statistic Trends
32
To Set up the Controller through the Service Port
33
Modstat Tab
33
Device Tab
34
Ports Tab
35
Bacnet Tab
35
Modbus Tab
37
Security Tab
37
To Communicate Locally through the Rnet Port
38
To Set up a Local Access Connection in the Webctrl® Interface
39
Troubleshooting
40
Leds
40
To Get a Module Status Report
42
To Get a Device Log
43
To Get the G5Ce's Serial Number
43
To Replace the G5Ce's Fuse
43
To Take the G5CE out of Service
44
To Revert to Default Settings
45
Compliance
46
FCC Compliance
46
CE and UKCA Compliance
46
Industry Canada Compliance
46
Bacnet Compliance
46
Appendix - Module Status Field Descriptions
47
Document Revision History
49
5
Based on 1 rating
Ask a question
Give review
Questions and Answers:
Need help?
Do you have a question about the Automated Logic OptiFlex G5CE and is the answer not in the manual?
Ask a question
Automated Logic OptiFlex G5CE Specifications
General
Brand
Automated Logic
Model
OptiFlex G5CE
Category
Network Hardware
Language
English
To Previous PageTo Previous Page
Loading...
Need help?
General