What to do if Automated Logic Network Hardware has an Ethernet connection problem?
If you're experiencing Ethernet connection issues with your Automated Logic Network Hardware, try connecting the Ethernet cable. If the issue persists, check other network components to ensure they are functioning correctly.
What to do if Automated Logic OptiFlex G5CE is unable to get address from DHCP?
If your Automated Logic Network Hardware is unable to obtain an address from DHCP due to an error indicating it can't find the DHCP server, you should consult with your network administrator for assistance.
What to do if Automated Logic OptiFlex G5CE Network Hardware has BACnet/IP DLL reporting issue?
If your Automated Logic Network Hardware experiences a BACnet/IP DLL reporting issue, such as being unable to create tasks or open a socket for the BACnet port, the suggested solution is to cycle the power.
General| Series | OptiFlex |
|---|---|
| Power Supply | 24 VAC/VDC |
| Operating Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity Range | 10% to 90% non-condensing |
| Communication Ports | 1 x RS-485 |
| Communication | BACnet MS/TP |
| Protocols | BACnet/IP, BACnet MS/TP |
Notice on ARCNET support discontinuation due to supply chain issues.
Information on the ModStat tab for viewing controller and network status.
To Next Page