Exporting / Importing
Configuration Data
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-INSTAL/DGB, Rev. C, 2016-29-02,
Autronica Fire and Security AS
Page 70
13. Exporting / Importing
Configuration Data
E-1676
This product contains static-sensitive devices. Please avoid any
electrostatic discharge during these operations.
13.1 USB Output
By means of a USB memory stick, configuration data can be
exported or imported.
The USB output J12 is used for this purpose. It is easily accessible
from the inside of the front panel door.
We recommend that the USB-stick that is to be used contains
Autronica-related files only.
Note that the maximum load on the USB port is 100mA.
The USB port is provided with a resettable fuse.
USB
output
J12
To Next Page
Loading...
Need help?
General
