Exporting / Importing
Configuration Data
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-INSTAL/DGB, Rev. C, 2016-29-02,
Autronica Fire and Security AS
Page 73
13.3 Exporting Configuration Data
To export configuration data, enter the service menu (see chapter
13.2), select the Export and Import menu, then perform the
command Export Configuration.
This command allows you to export configuration files from the
system to a USB memory stick.
From the Service Menu, perform the following:
Use the arrow down button to scroll downwards to
Export and Import, then press Enter.
Press the arrow down button to select Export Configuration, then
press Enter.
The following message will appear:
” Copy the last saved configuration file to a USB device.”
To execute the command, use the left arrow button to select
Accept, then press Enter.
13.4 Importing Configuration Data
To import configuration data, enter the service menu (see chapter
13.2), select the Export and Import menu, then perform the
command Import Configuration.
This command allows you to import configuration files from a USB
memory stick.
From the Service Menu, perform the following:
Use the arrow down button to scroll downwards to
Export and Import, then press Enter.
Press the arrow down button to select Import Configuration, then
press Enter.
The following message will appear:
”Import configuration files from the USB device. The imported
configuration will not have any impact on the running system.
To use the imported configuration, please restart the system.”
To execute the command, press the left arrow button to select
Accept, then press Enter.
Make sure to save all recent configuration changes (using the Save
Configuration command in the System Settings menu, chapter 13.7)
before executing the Export Configuration command.
The imported configuration will have no impact on the running
system. To use the imported configuration the system must be
restarted (Restart System, chapter 13.6).
To Next Page
Loading...
Need help?
General
