Autronica Autroprime Installation Handbook

Exporting / Importing
Configuration Data
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-INSTAL/DGB, Rev. C, 2016-29-02,
Autronica Fire and Security AS
Page 75
 To execute the command, press Enter once more.
13.7 Save Configuration
Each time a configuration has been changed, this command
should be run. The changes will not become effective until a
Restart System command is performed.
From the Service Menu, perform the following:
 Press Enter to select System Settings.
 Press Enter twice to select Save Configuration.
 Type a new Site Name, or accept the existing one by pressing the
arrow down button.
 Type a new Operator Name, or accept the existing one by pressing
the arrow down button.
 Press Enter to type a new Site Configuration Version then press
Enter, or accept the existing one by pressing the arrow down
button.
 Press Enter to type a new Description then press Enter, or accept
the existing one by pressing the arrow down button.
 To confirm, press Enter.


Autronica Autroprime Specifications

General

Brand	Autronica
Model	Autroprime
Category	Fire Alarms
Language	English