Volume control and option selector buttons
Issue 5 July 2001 21
The volume control buttons have an (up) button, a (down) button, and the
SELECT button is used to select a different tone or option. To adjust the volume or
to select an option on your console:
1. Press and release the (up) button or (down) button to activate the
display.
2. Press the
SELECT button to choose the type of tone you wish to adjust or the
option that you wish to change.
3. Press and release the (up) button to increase the volume or the
(down) button to decrease the volume. Use these same buttons to change
option settings.
4. Press any other button on the console to complete this task.
To Next Page
Loading...
