Understanding the console layout
22 DEFINITY ECS Console Operations
Selector console
The Selector Console allows you to transfer calls and determine the status of an
extension. It has two groups of buttons and lamps: the Hundreds Group Select
(HGS) and the Direct Extension Selection (DXS) with Busy Lamp Field (BLF).
The basic selector console has 8 HGS buttons; the enhanced selector console
has 20. You use them in conjunction with the DXS buttons to dial an extension.
For example, if you wish to transfer a call to extension 83452, press the HGS
button labeled 834, then press the DXS button labeled 52.
The 100 DXS buttons are labeled from 00 to 99. When combined with the HGS
buttons, they provide up to 800 possible extensions for the basic selector console
and up to 2000 possible extensions for the enhanced selector console. For more
information on how to transfer calls, refer to ‘‘Transferring calls to internal
extensions’’ on page 29.
Figure 9. Selector console
1. DXS/BLF buttons 2. DXS hundreds group select buttons
10 11 12 13 14 15 16 17 18 19
00 01 02 03 04 05 06 07 08 09
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
phdgdxs KLC 031199
1
2
To Next Page
Loading...
