Avaya S8700 - Page 11

11
Installing the S8700 Multi-Connect
Contents
October 2002
Connect the Ethernet switch cables to IPSI circuit packs 193
Avaya MCC1 Media Gateway 193
Avaya SCC1 Media Gateway 193
Connect Avaya SCC1 media gateway IPSI and
maintenance circuit pack ribbon cables 199
Program the IPSI circuit packs 205
Using DHCP addressing 206
Using static addressing 208
Verify connectivity to the media servers 211
Verify IPSI firmware version 211
Enable control of IPserver interfaces 212
Verify License Status 212
Connect the USB Modems 212
Co-located servers 212
Separated servers 213
• Connecting to the Customer’s Network 215
Avaya™ S8700 Media Server 215
TN799DP Control LAN 216
Check your shipment 217
Install a TN799DP C-LAN 217
Install the cables 217
Install the circuit packs 218
Administer the TN799DP 219
Test the External Connection to the LAN 220
The TN2302AP IP Media Processor 222
Check your shipment 222
Install a TN2302AP IP Media Processor 223
Install the cables 223
Install the circuit packs 224
Administer the IP Media Processor 225
Test the External Connection to the LAN 227
The TN801B MAP-D LAN Gateway 228
TN2501 Voice over the LAN (VAL) 229
Important File Specifications 229
Caveats 229
Installing VAL 230
Install the TN2501AP Circuit Pack 232
Administer the TN2501AP 233
Test the IP connections 236