8
Installing the S8700 Multi-Connect
Contents
October 2002
Check Commercial Power and Connect AC Power 94
Connect Fiber Optic Interconnect Cabling 94
Connect Fiber Optic Cables 95
Connect Duplex- or High-Reliability
CSS-Connected PN1 with 1 Switch Node 95
Connect High-Reliability CSS-Connected PN1
with 1 Switch Node 96
Connect Critical Reliability CSS-Connected PN1
with 1 Switch Node 97
• Installing an Avaya SCC1 Media Gateway Stack 99
Unpack and Inspect Media Gateways 101
Check Circuit Packs 102
Position the Media Gateway Stacks 103
Install Earthquake Protection for Avaya SCC1 Media Gateway 103
Ground DC power media gateways 106
Connect Ground to DC power cabinet 106
Connect Ground for DC power cabinet 106
Connect DC Battery Frame Ground 107
Connect DC Power Distribution Unit Ground 108
Connect DC Power Cabinet Ground 109
Connect DC Power 110
Connect the DC power 110
Making DC Power Connections 111
DC Power Connections with DC Distribution Unit 111
Stacking DC Power Cabinets 111
Connect AC Power to DC Power Cabinet 114
Connect Battery Cabinet 115
Connect Optional Battery Leads 116
Ground and Connect AC-Powered Media Gateways 117
Connect the AC Grounds 117
Connect AC-Power Ground 117
Set the Ringer Frequency 119
Connect the Power Cord into the Power Receptacle 119
Connect Time Division Multiplexing Bus Cables 119
Verify Port Media Gateway Address Plugs 121
Install Rear Panels 122
Install Rear Ground Plates (Media Gateways
with Earthquake Protection) 123
To Next Page
Loading...
