17
12.3 Tool speed/Setting
12.4 Short interval operation
12.5 Ambient conditions
13. Disposal
Note
The user institution is obliged to process the product before its disposal, see
Validated reprocessing procedure.
► Detailed information concerning the disposal of the product is avail-
able through your national B. Braun/Aesculap agency, see Technical
Service.
14. Distributor in the US/Contact in Can-
ada for product information and com-
plaints
Aesculap Inc.
3773 Corporate Parkway
Center Valley, PA, 18034,
USA
Adjustable motor direction Clockwise/counterclockwise rota-
tion
Adjustable maximum speed set-
ting
10 000 rpm
to 80 000 rpm
Step width for maximum speed
setting
5000 rpm
Factory pre-setting for maximum
speed setting
75 000 rpm, right rotation
Ambient temperature 10 °C to 27 °C
Application cycle 30 second application
30 second pause
Max. application cycles
∞ at 60 000 rpm
Max. temperature 48 °C
Operation Storage and transport
Temperature 10 °C to 27 °C -10 °C to 50 °C
Relative
humidity
30 % to 75 % 10 % to 90 %
Atmospheric
pressure
700 hPa to 1 060 hPa 500 hPa to 1 060 hPa
Adhere to national regulations when disposing of or recy-
cling the product, its components and its packaging!
The recycling pass can be downloaded from the Extranet
as a PDF document under the respective article number.
(The recycling pass includes disassembling instructions for
the product, as well as information for proper disposal of
components harmful to the environment.)
Products carrying this symbol are subject to separate col-
lection of electrical and electronic devices. Within the
European Union, disposal is taken care of by the manufac-
turer as a free-of-charge service.
To Next Page
Loading...
