B. Braun Aesculap - Applicable To; Intended Use; Task;Function Within System; Application Environment

2
Aesculap
®
ELAN 4 electro Standard handpiece (1 ring) GA861 to GA864 / ELAN 4 electro
HD handpiece (2 ring) GA865 to GA869
Aesculap
®
ELAN 4 electro Standard handpiece (1 ring) GA861 to GA864 / ELAN 4 electro HD handpiece (2 ring) GA865 to GA86 9
Legend
1 ELAN 4 tool coupling (1 ring or 2 ring)
2 Ring marking
3 Connector for motor cable
4 Slider for tool release
5 Symbol of the applied part type in display of ELAN 4 electro control
unit
6 ELAN 4 tool (1 ring or 2 ring)
7 ELAN 4 single-use spray nozzle for 1 ring or 2 ring handpieces
ELAN 4 ECCOS holder for 12 drills GB718R
8 Side handles
9 Holding nibs
10 Tool coupling
11 Tab
Symbols on product and packages
Contents
1. Applicable to. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Task/function within system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Application Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.3 Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.4 Contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Safe handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Sterile ELAN 4 tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Sterile ELAN 4 single-use spray nozzles . . . . . . . . . . . . . . . . . . . 4
4. Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.1 Available sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.2 Package includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.3 Components required for operation . . . . . . . . . . . . . . . . . . . . . . 5
4.4 Operating principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6. Working with the applied part . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1 System set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.2 Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Validated reprocessing procedure . . . . . . . . . . . . . . . . . . . . . . . . 7
7.1 General safety notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7.2 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.3 Preparations at the place of use . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.4 Preparation before cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.5 Cleaning/disinfection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.6 Manual cleaning with immersion disinfection - applied part . 10
7.7 Mechanical cleaning/disinfecting with manual pre-cleaning -
applied part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.8 Mechanical cleaning/disinfecting with manual pre-cleaning -
tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7.9 Inspection, maintenance and checks . . . . . . . . . . . . . . . . . . . . . 14
Caution
Observe important safety information such as warn-
ings and precautions in the instructions for use.
YYYY-MM
Maintenance label
Recommended date of next service (format: YYYY-
MM) by international B. Braun-/Aesculap agents, see
Technical Service
Machine-readable, two-dimensional code
The code contains a unique serial number which can be
used for electronic tracking of the individual instru-
ment. The serial number is based on the global stan-
dard sGTIN (GS1).
Date of manufacture
Sterilization using irradiation
Not for reuse in intended applications as defined by the
manufacturer
Use by
Manufacturer’s batch designation
Manufacturer’s serial number
LOT
SN
Manufacturer’s article number
Temperature limits during transport and storage
Air humidity limits during transport and storage
Atmospheric pressure limits during transport and stor-
age
REF