BADU OmniTronic - Page 80

Description
14 EN 03|2022
Menu tree interval mode (factory setting)
Press the “Menu” button to go to the menu tree.
Fig. 1
Status
Operation mode
Settings
Backwash
Settings
Rinse
Settings
Filter
Clock
Settings
Service Various time specifications e.g. next backwash, last backwash, operating hours.
Settings
Relay z1-z2
Options
Language
Settings DC3/AC3
Offset DC4/DC5
Display
Info
Interval automatic
Time controlled automatic
Manual drain
Manual circulate
Manual closed
09.
12. 17
23: 17:
09
Duration
Speed
Seconds:
Level:
2
10
Alternative
5 ... 180
Alternative
1 ... 3
Status
Filter:
on
Alternative
off
Duration
Speed
Hours:
6
Level:
1
Alternative
1 ... 24
Alternative
1 ... 3
Off
Status
Interval
Duration
Speed
Backwash:
on
Days:
7
Minutes:
1
Level:
2
Reset
WG27.50.123-2-P
Manual filter
Alternative
6 hours ... 31 days
Settings
Relay 11-14
Settings
Relay z7-z8
Various settings such as level control, …
Various settings such as heating control, cooling, solar control, frost protection, error message and timer.
Various settings such as heating control, cooling, solar control, frost protection, error message and timer.
Quick status display Information on current speed, functions, inputs/outputs, level functions, ...
General
Functions
Frost protection
Status,
se tt i n g s
Settings
Niv1, Niv2,
Niv3
Sensor
level control