R5906852 /09 F80118
9.2 Assigning a created projector profile to a
preset
This procedure assumes you have created at least one projector profile. For more info on saving
projector settings to a profile, see “Saving the current projector settings in a profile”, page 116.
How to assign a projector profile to a preset
1. In the main menu, select Profiles → Edit.
Image 9–4 Profiles menu, edit
The edit menu is displayed.
Image 9–5 Profile edit menu
2. Select the desired projector profile from the list and confirm.
The profile pane will expand.
Image 9–6 Example of a projector profile with available preset slots
3. Use the arrow keys to select a preset slot and confirm with the okay key.
GUI – Projector profiles
To Next Page
Loading...
