R5906852 /09 F80150
How to adjust the P7 native settings
1. In the main menu, navigate to Settings → Maintenance → Advanced, while you are logged in.
Image 11–8 Maintenance menu, Advanced
2. In the Advanced Settings menu, select Native RealColor.
Image 11–9 Advanced Settings, Native Realcolor
The RealColor calibration menu will be displayed.
Image 11–10 Example of the RealColor calibration menu
3. Select the desired value to change and confirm.
4. Change the values to the desired position, taking into account the color gamut values.
5. Select APPLY and confirm.
11.4 Advanced Settings – Statistics
What can be seen?
The statistics screen displays the general information about the projector, spread over different tab pages.
The following items will be displayed:
• Fan run time
• Long frequency run time
• Pump run time
• System run time
• Total operating time
Advanced Settings
To Next Page
Loading...
