83R5906852 /09 F80
If you notice the tilt sensor isn’t working correctly (e.g. when compared to a level), you can calibrate
the sensor in the settings menu. For more info, see “Advanced settings – Tilt sensor calibration”,
page 154.
8.5 Manipulating the rigging frame
When can you manipulate the rigging frame?
You can manipulate the rigging frame in the Pulse menu when projector is mounted in a motorized rigging
frame, otherwise this menu is not present.
How to manipulate the rigging frame?
1. In the main menu, select Installation → Lens → Motorized frame.
Image 8–9 Lens menu – Motorized frame
The Motorized frame menu is displayed.
Image 8–10 Example of the Motorized frame menu
2. Press the OK key or button to activate the frame shift motors.
GUI – Installation
To Next Page
Loading...
