R5906852 /09 F8068
If the source signal is HDR encoded an HDR icon will be visible next to the source signal. This is visible both in
the Source selection menu, as well as the status menu.
Image 7–12 Example of the HDR icon on the status menu
For more info on PQ and HDR, refer to “Displaying HDR content”, page 76.
How to adjust the gamma type?
1. In the main menu, select Image → Gamma type.
Image 7–13 Image menu – Gamma
The Gamma type menu is displayed. If source content is available, the detected gamma of the source will
be displayed at the bottom of the menu.
Image 7–14 Example of the gamma menu
2. Use the ◄ or ► key to select the desired gamma type and confirm.
GUI – Image
To Next Page
Loading...
Need help?
General
