Field Service Manual December 2003
Page 11 of 276
Status Lamp.
This lamp has two functions:
· Continues light: drum is spinning.
· Flashing light : No film in machine.
A severe error has occurred.
This same function can also be seen on the external (optional) indication
lamp.
In standby mode the button appears dimmed.
Machine Stop Button.
The stop button stops the machine at any time. It is located on the console, at
the right hand side of the machine.
Index LED.
This LED shows the index position of the drum.
The color of the LED is green.
Main On/Off Switch.
This switch is used to switch the main power of the SilverWriter on or off. The
To Next Page
Loading...