Field Service Manual December 2003
Page 80 of 276
MF Electrical Solid State panel
Used for:
Film detection Bridge. Input detection 3 Is one when film is detected
End detection Film plate. Input detection 1
(Flatcable) Is one when film plate back is detected
Start/stop Motor Film plate. Solid state number 1(at det SS) SIOREL/RIOREL 1
0 motor stopped
REMARK:
Following command line should be used to move the motor in LTL:
1 siorel 5e5 wait 1 riorel (No limit protection within LTL!!!!)
Left/right movement Motor Film Solid state number 2 SIOREL/RIOREL 2
0 motor moves backwards
Blow pipe command Solid state number 3 SIOREL/RIOREL 4
0 Blower is off
Extended position Roller Solid state number 4 SIOREL/RIOREL 8
RMF1 : Motor direction
RMF2 : Motor activating
G101300
G101290
To Next Page
Loading...